MIDI Shield

MIDI Shield дает вашему Arduino воззможность работать с MIDI-протоколом, позволяя управлять музыкальными синтезаторами, секвенсерами и другими устройствами. MIDI-протокол имеет много общего со стандартным асинхронным последовательным интерфейсом, что позволяет использовать UART-выводы Arduino для отправки и получения MIDI-сообщений.

The MIDI Shield provides an opto-isolated MIDI-IN port as well as a MIDI-OUT port. The MIDI Shield can be mounted directly on top of an Arduino, connecting the MIDI-IN to the Arduino's hardware RX pin and the MIDI-OUT to TX. Potentiometers are connected to analog pins 1 and 2, and can be used to control volume, pitch, tone or anything else you'd like. Also connected on the shield are three momentary push buttons (connected to D2-4), a reset button, and green and red stat LEDs. The RUN/PROG switch allows you to program the Arduino over serial without having to remove the shield.

Note: The MIDI Shield does not come with the through-hole MIDI connectors or trimpots soldered on. All of these components (2 MIDI connectors and 2 trimpots) are included with the product, however.

Documents:

• Schematic
• Example Arduino Sketch
• Arduino MIDI Tutorial

Мнения покупателей: